Full-Grain Leather Slip Training Dog Collar with Brass O-Ring
Full-Grain Leather Slip Training Dog Collar with Brass O-Ring
Designed for supervised training and controlled handling, this leather slip collar combines a traditional slip-style construction with full-grain leather, a wider padded neck section, and a solid brass O-ring.
Highlights
- Full-grain leather provides a natural feel with visible leather character that develops with use.
- A widened, padded leather section creates a broader contact area around the neck than a narrow leather strap alone.
- Stitched construction helps maintain the shape of the padded section and gives a refined, handcrafted appearance.
- A wooden adjuster allows the opening to be set within about 7.9–27.6 in (20–70 cm). The slip-style structure tightens and releases with leash tension—unlike a fixed buckle collar.
- A solid brass O-ring is the leash connection point and complements dark leather with a classic warm finish.
- Hand-braided leather detailing at the connection area adds reinforcement and a distinctive handcrafted look. For supervised training, controlled walks, and intentional slip handling—not a substitute for everyday ID or a walking harness.
Fit & use note:
Size by head pass and neck: the loop must go on over the head, then settle so it cannot slip off when relaxed. Use the wooden adjuster for supervised fit only. For everyday walking load, a fitted harness is still the safer default; keep a separate buckle collar for ID tags. Do not leave this collar on an unattended dog.
Related: Slip vs Buckle · Limited-Slip vs Full Slip · Leather Collars
| Size |
M, L |
|---|---|
| Material |
Brass, Full Grain Leather |
| Care Instructions |
• Air dry naturally and keep away from prolonged direct sunlight. |
How to Use This Leather Slip Training Collar
This collar uses a traditional slip-style loop with a wider padded full-grain leather neck section, a wooden adjuster, and a solid brass O-ring for the leash. It tightens under leash tension and should ease when the leash relaxes. Use only under supervision—not as an everyday buckle ID collar.
Choosing the Right Size Before Purchase
Use a soft measuring tape to measure both head circumference and neck circumference, then compare with this product’s size chart. Size letters on other collars are not interchangeable—confirm the chart on this page. The adjustable opening is designed to cover a wide range (about 7.9–27.6 in / 20–70 cm)—still match your dog to the chart before ordering.
-
Measure the Head Circumference
Measure around the widest part of the head (typically around the ears and under the jaw). The loop—with the wooden adjuster opened for putting on—must pass comfortably over this area.
-
Measure the Neck Circumference
Measure where the padded leather section will sit. Keep the tape comfortably snug—not tight.
-
Select a Size from This Product’s Chart
The collar must go on over the head while still fitting the neck appropriately when relaxed. Confirm the chart on this product page—do not reuse another slip collar’s size labels.
-
Simulate the Fit Before Ordering
Form the tape into a loop and gently test whether it can pass over the widest part of the head. This helps confirm on/off comfort before you buy.
If between two sizes, choose the larger size only if the padded neck section will still sit appropriately when the adjuster is set for supervised use.
Setting the Wooden Adjuster
The wooden adjuster controls how large the slip opening can get. Set it before and after you put the collar on.
-
Open for Putting On
Set the wooden adjuster so the opening is wide enough to pass over the head comfortably.
-
Set the Training / Walking Fit
Once on the neck, adjust so the collar cannot come off over the head when relaxed, while still allowing comfortable breathing and movement at rest. The padded leather section should sit as the main contact area.
-
Recheck After the First Sessions
Leather can soften and settle with use. Recheck the wooden adjuster regularly so the fit stays secure and comfortable under supervision.
Putting It On
-
Open the Slip Loop
With the adjuster opened for putting on, form a wide loop so the padded leather section can pass over the head comfortably.
-
Place the Padded Section
Guide the collar over the head and settle the wider padded leather section across the neck as the main contact surface.
-
Set the Adjuster, Then Attach the Leash
Set the wooden adjuster for your supervised fit (see above). Clip the leash to the solid brass O-ring. Confirm the braided leather connection and O-ring move freely and are not twisted.
During Use
Use calm, controlled leash handling. This is a slip-style training collar: it can tighten under tension and should ease when the leash goes slack. It should not stay continuously tight.
For everyday walking load, a fitted harness is still the safer default. Keep a separate buckle collar for ID tags. Use this collar when you specifically need supervised training or controlled slip handling.
Safety Note
For supervised training, walking, and controlled handling only. Do not leave this collar on an unattended dog.
Do not use for tie-outs or tethering, and never attach your dog to a fixed object with this collar.
Regularly inspect the padded leather section, wooden adjuster, hand-braided connection, solid brass O-ring, and stitching. Discontinue use if the adjuster slips unexpectedly, leather frays, or any connection is damaged.
Is this a buckle collar?
No. It is a slip-style training collar: the loop can tighten under leash tension and ease when the leash relaxes. It is not a fixed-length everyday buckle collar. Compare: Slip Collar vs Buckle Collar.
How is this different from the limited-slip chain or adjustable rope collars?
This model is a classic leather full-slip with a wider padded neck section, wooden adjuster, and solid brass O-ring. Limited-slip uses a short chain that stops after limited travel; the adjustable rope model uses a leather stopper on braided rope. Overview: Limited-Slip vs Full Slip.
What does the wooden adjuster do?
It sets how large the collar can open (about 7.9–27.6 in / 20–70 cm). Open it to put the collar on over the head, then set a supervised walking or training fit that cannot come off when relaxed.
How should it fit?
Measure the widest part of the head and the neck. The open loop must pass over the head comfortably; when relaxed, the collar should not slip off. Confirm fit on this product page. See How Tight Should a Dog Collar Be? and the Size Guide.
Should I walk on this collar or a harness?
For everyday walking load, a fitted harness is still the safer default. Use this collar when you specifically need supervised slip-style handling or training. Overview: Harness vs Collar.
Can my dog wear this all day or while unsupervised?
No. Slip training collars are for supervised use only. Do not leave the dog unattended in this collar, and do not use it for tethering, crates, or as the everyday ID collar.
Is the O-ring solid brass?
Yes—the leash connection is a solid brass O-ring with a classic warm finish that may develop a natural patina. Hardware context: Brass vs Stainless.
How do I care for the leather and brass?
Wipe leather clean when dirty and air-dry away from direct heat after wet walks. Avoid long soaks. Leather may deepen in color with use—expected character. Wipe the brass O-ring dry after wet outings if you want to slow patina. Inspect the padded section, adjuster, braid, and stitching regularly.
Where can I find sizing and shipping info?
Confirm the adjustable opening range and fit notes on this product page. Policies: Shipping · Returns · Size Guide.